Indian aerospace startup Agnikul set to flight test 3D-printed engine by end of 2023

In a groundbreaking move, Agnikul Cosmos, an aerospace startup based in Chennai specialising in the development of satellite launch vehicles, is set to launch its inaugural flight with the world’s first 3D-printed engine before the close of this year, according to a report by the Economic Times.

The upcoming mission serves as a technological demonstrator, and is supposed to emulate Agnikul’s planned orbital launch — the first commercial launch anticipated in 2024 — but on a smaller scale.

“We are looking to launch by the end of the year. One test is pending, which will be conducted on our campus at IIT-Madras. Once the final reviews with ISRO (Indian Space Research Organisation) are complete, we are good to go as the launch vehicle is already at the launch pad,” stated Chief Executive Srinath Ravichandran told reporters. “This isn’t a sounding rocket and is a complex machine, so we want to get it right in the first attempt.”

Should the mission prove successful, the startup, incubated at the Indian Institute of Technology, Madras campus, will become India’s second private company to develop a small satellite launch vehicle. The first, Skyroot Aerospace, launched the Vikram S in November 2022.

Ravichandran highlighted a key distinction between Agnikul’s rocket, Agnibaan, and the Vikram S. While the Vikram S was a sounding rocket launched from guide rails, Agnibaan would lift off vertically, following a predetermined trajectory and executing precisely orchestrated manoeuvres during flight.

Agnibaan SOrTeD (SubOrbital Technological Demonstrator) is a highly customizable, single-stage launch vehicle capable of carrying up to 300 kg payload to orbits around 700 km above the ground (basically into the low Earth orbits). Anirban follows a plug-and-play configuration, adapting to the size of the satellite taken to space.

One of the biggest differences comes in the propellant system that Agnikul is using and how they resize their launch vehicles. Because they offer customisable sizes of launch vehicles, they can configure the vehicle for a particular payload size or satellite size. Furthermore, liquid propellants, used in Agnikul’s rocket, are reusable and safer compared to solid propellants.

Agnikul’s patented Agnilet engine stands as the world’s first single-piece 3D-printed engine, designed and manufactured entirely in India. Successfully test-fired in early 2021, this achievement marked a significant milestone for 3D printing technology in India, which traditionally have been reserved for medical implants.

The integration process of the launch vehicle, located at the Satish Dhawan Space Centre in Sriharikota, with the company’s private launchpad, was completed on August 15.

Agnikul’s customer base encompasses entities building small satellites aiming for a low Earth orbit, with payloads mainly consisting of communication and imaging satellites.

The Agnikul 3D printing Rocket Factory houses a metal 3D printer from EOS, along with other machines facilitating end-to-end manufacturing of a rocket engine within a single facility.

(With input from agencies)



from Firstpost Tech Latest News https://ift.tt/m8Nve71

Comments

Post a Comment

Popular posts from this blog

COVID-19 origins: Should we pay more attention to the lab leak theory and formally investigate it?

Image
A year and a half into the pandemic, we still do not know exactly where the SARS-CoV-2 virus, which causes Covid-19, came from. The prevailing view so far has been that the virus “spilled over” from bats into humans. But there are increasing calls to investigate the possibility that it emerged from a lab in Wuhan, China, where Covid first appeared at the end of 2019. So what do we know for sure, and what do we need still to find out? We know the sequence of the SARS-CoV-2 virus is close to that of bat coronaviruses . Several decades ago its “ancestor” was circulating in bat populations in southern Asia. But there are still many unanswered questions: we don’t know how the virus arrived in Wuhan, how its sequence evolved to allow human infection, and under what conditions it infected the first people who crossed its path. And for each of these stages, we don’t know whether there was a human contribution (direct or indirect). Zoonotic transmission pathways, in other words the pas
Read more

Menstrual cups are cheaper, more sustainable than pads and tampons for women

Image
Every year in America, women spend at least US$2.8 billion on sanitary pads and tampons that can take hundreds of years to decompose . Is there a more economical and environmentally friendly way? To find out, we asked Susan Powers , a professor of sustainable environmental systems at Clarkson University about her work comparing the environmental impact of tampons, sanitary pads and menstrual cups. What is a menstrual cup? A menstrual cup is a type of reusable feminine hygiene product. It’s a small, flexible bell-shaped cup made of rubber or silicone that a woman inserts into her vagina to catch and collect menstrual fluid. It can be used for up to 12 hours, after which it is removed to dispose of the fluid and cleaned. The cup is rinsed with hot water and soap between each insertion and sterilized in boiling water at least once per period. A cup can last up to 10 years . Although menstrual cups have been around for decades, they historically have been less popular than pads or ta
Read more

Human bodies respond to infections differently depending on the time of day

Image
When microorganisms – such as bacteria or viruses – infect us, our immune system jumps into action. It’s highly trained to sense and eliminate infections and clear up any damage caused by them. It’s typically assumed our immune systems work the exact same way regardless of whether an infection occurs during the day or at night. But research spanning over half a century now shows our bodies actually respond differently at day and night. The reason for this is our body clock, and the fact that each cell in the body, including our immune cells, can tell what time of day it is. Our body clock has evolved over millions of years to help us survive. Every cell in the body has a collection of proteins that indicate the time depending on their levels. Knowing whether it’s day or night means our body can adjust its functions and behaviours (such as when we want to eat) to the correct time. Our body clock does this by generating 24 hour rhythms (also termed circadian rhythms ) in how cells f
Read more